1/2-Ton Tri-Adjustable Gantry Crane
7′ 10″ – 12′ 4″ High, 15′ Span
✓ Aluminum Construction
✓ Adjustable Height (C), Span(B), and Caster Frame Spread (E)
✓ 1/2 Ton (1,000 pound) capacity (A)
✓ 10′ 1″ Clear Span (D)
✓ 6′ 0″ – 10′ 0″ Caster Frame Spread (E)
✓ 13″ Leg Clearance (F)
✓ 6″ Caster Diameter (G)
✓ 8″ I-Beam Depth (H)
✓ 330 Pounds Net Weight
Designed and manufactured in the United States
Easy to assemble, disassemble, transport, and store
Lightweight yet strong
Designed to roll under load
Most orders ship in 3 to 5 days.
Durable, Stable, Adjustable, and Portable
Our most popular product line is the lightweight aluminum tri-adjustable 1/2 to 3-ton gantry crane. The aluminum design makes these cranes an ideal combination of high lifting and reduced weight. Made with high-quality heavy-gauge aluminum tubing, our 1/2 to 3-ton Tri-Adjustable gantry cranes are designed to roll under load. They have an adjustable height (C), span (B), and caster frame spread (E).
- The Tri-Adjustable is built using our patented pinned-joint design resulting in a longer-lasting, better-fitting, more flexible crane that is quick and easy to assemble and disassemble.
- Exclusive Wallace I-beam support system aligns off-center loads to avoid crane and trolley distortion. Support system slides along the I-beam enabling leg spacing adjustments and cantilever configurations.
- Casters are equipped with a 4-position swivel lock. When locked 90 degrees with each other, they position the crane more firmly than a brake.
- Adjustable legs permit crane height adjustments in 6″ increments using spring-loaded bolts. You can raise the height of your crane so it goes over materials and equipment, lower it under low ceilings and doorways, or set legs at different heights when floors or terrains are uneven. It’s ideal for truck loading or from a dock to a floor or ground level to a mezzanine.
- Adjustable span allows for inboard or outboard bracing and a cantilever configuration overhang of up to 25% of the I-beam length.
- Adjustable caster frame spread (E) enables rolling through narrow aisles or doorways and prevents having to disassemble and reassemble your crane. Safety cables inside the caster frame tubes prevent overspreading while adjustments are underway. Casters are equipped with 4-position swivel locks to position the crane more firmly than a brake.
- Tri-adjustables can be wheeled around to serve more than one workstation or workplace. Lock “lead” casters and unlock trailing casters to easily move and steer crane. An optional Kart Kit transforms your disassembled gantry crane into a cart, allowing easy transportation and storage.
Print / download A0T12-A15AC dimensional drawing (PDF).
|ITEM NO.||PART DESCRIPTION||PART NUMBER||QUAN.|
|1||MAIN LEG BRACKET||1553-0000||4|
|2||SUPPORT PIN 11/16 DIA. X 4 9/16 LG.||5017-0004||4|
|3||SPACER BAR 25 3/4 LG.||1744-0004||2|
|4||COTTER PIN 1/4 X 1 1/4 LG.||60-0070||8|
|5||HEX. NUT 3/8-24NC||54-0100||4|
|6||SOC. SET SCREW 3/8-24NF X 1 3/4 LG.||63-0110||4|
|7||SOC. SET SCREW 3/8-24NF X 1 LG.||63-0100||4|
|8||LEG BRACE BRACKET||1761-0000||4|
|9||SUPPORT PIN 11/16 DIA. X 4 1/8 LG.||2853-0000||4|
|10||MAIN LEG SWIVEL PIN||1564-0000||4|
|11||LEG BRACE SWIVEL PIN||1560-0000||4|
|12||HEX. HD. BOLT 3/4-10NC X 2 1/2 LG.||51-0480||4|
|13||TROLLEY STOP ANGLE||3464-0000||4|
|14||KEY RING 2 1/4 OD.||82-0030||10|
|15||CAUTION TAG NO. 399||1969-RING||12|
|16||LOCK WASHER INT. TOOTH 3/4||58-0040||4|
|17||NEX. NUT 3/4-10NC||54-0040||4|
|18||I BEAM AL. 8″ X 15′||750-0150||1|
|19||LEG BRACE ASSEMBLY||1540-0080||4|
|20||MAIN LEG ASSEMBLY||1630-0080||4|
|21||UPPER MAIN LEG||631-0080||4|
|22||ROLL PIN 5/32 X 3/4 LG.||61-0300||4|
|25||LOWER MAIN LEG||1632-0080||4|
|26||CASTER FRAME ASSEMBLY||690-0020||2|
|27||LOWER MAIN LEG PIN ASSEMBLY||1999-0000||4|
|28||HEX. HD. BOLT 1/2-13NC X 4 LG.||51-0460||4|
|29||SAFETY CABLE ASS’Y 121″ LG.||1967-0020||2|
|30||OUTER CASTER FRAME TUBE||697-0020||2|
|31||CASTER FRAME ADJUSTMENT PIN||1392-0000||2|
|32||INNER CASTER FRAME TUBE||698-0020||2|
|33||CASTER CASTING FOR INNER TUBE||2455-0000||2|
|34||CASTER CASTING FOR OUTER TUBE||2456-0000||2|
|35||LOCK WASHER INT. TOOTH 1/2||58-0020||4|
|36||HEX. NUT 1/2-13NC||54-0050||4|
|37||HEX. HD. BOLT 3/8-16NC X 1 1/2 LG.||51-0190||16|
|38||LOCK WASHER INT. TOOTH 3/8||58-0060||16|
|39||HEX. NUT 3/8-16NC||54-0060||16|
|40||CASTER WHEEL 6″ DIA.||47-12NB||4|
|41||SAFETY STOP ASSEMBLY||3112-0001||4|
Note: There are alternate v-groove casters available for this crane.
Print / download a copy of parts list (PDF).
Parts Location Diagrams
Round-Tube Tri-Adjustable I-Beam Assembly Parts Location Diagram
Round-Tube Tri-Adjustable Caster Frame Assembly Parts Location
Print / download a copy of both parts location diagrams (PDF).
Available accessories include manual and electric trolleys and hoists, jack kits for frequent crane height adjustments, kart kits for transforming your disassembled crane into a cart which allows for easy transport and storage, and festooning kits to keep hoist, trolley, and power drive system cords up and out of the way.
Options for track mounting with V-groove casters and motorizing cranes are also available.
Assembly and Disassembly Instructions
- Read and understand instructions before using this gantry.
- Inspect gantry thoroughly before using. See the Tri-Adjustable Operating, Adjustment, and Inspection Instructions (Form 379) for damaged or missing parts.
- Do not lift more than rated capacity.
- Center hoist over the load.
- Do not allow the load to swing or roll against any supporting members.
- When moving the gantry under load, push on the gantry, not the load. Be certain that the rolling surface is hard, level, clean, and smooth.
- Do not move the gantry over 50 feet per minute (1/2 m.p.h.).
- Not to be used for lifting or supporting humans.
Before You Begin
- Place parts on a flat surface, preferably on cardboard to keep small parts clean and organized.
- Select a clear area to assemble the crane. The work envelope should extend five feet beyond twice the leg length (when flat) and the length of the I-beam.
- This clear area should be serviced by two overhead hoists or an alternate as shown below as well as in Form 379. This will allow you to raise the I-beam and leg assemblies when required.
- Select tools for fastening the nuts and bolts.
- You will also need C-clamps to hold the trolley in place while the crane is assembled.
Print / download a PDF of detailed, step-by-step Tri-Adjustable Gantry Crane Round-Tube Assembly Instructions (Form 429).
Safety Tag and Label Locations
Safety Tag Location
The following sketch shows the location of required safety tags on Wallace Tri-Adjustable Gantry Cranes. All locking pins or pins with a quick release must have a corresponding Tag 1969. Following the schematic below is a complete listing of all text found on all Labels and Tags on the Crane.
Print / download a PDF of the Tri-Adjustable Round-Tube Safety Tag and Label Locations Diagram.
Inspection Checklist (Form 504)
- What to check for.
- How often to check.
- Frequent Inspection Checklist.
- Periodic Inspection Checklist.
View detailed Gantry Crane Inspection Checklist (Form 504).
Print / download a PDF copy of the checklist.
If you have questions or need assistance, please contact us.
Please note this checklist was derived from company proprietary materials and (3) source documents including ANSI B30.17, CMAA Specification #74 Revised 1987, and OSHA 1910.179. As excerpts, the short form Wallace documents are intended to serve as general guidelines and are not to be considered the sole source when performing routine maintenance and inspection tasks.
Operating, Adjustment, and Inspection Instructions (Form 379)
- Assembly and Safety Instructions
- Daily inspection
- Positioning of Crane to Handle Loads
- Positioning of Casters
- Adjustment Instructions
- Height Adjustment Procedure
- Caster Frame Adjustment Procedure
- Cantilever Configuration / Adjustment
- Wallace Built-In Safety Features
- Caution Areas
- Tri-Adjustable Visual Checkpoints
- General Safety Instructions for Crane Adjustments
- Methods of Supporting the Crane for Assembly
View detailed Tri-Adjustable Operating, Adjustment, and Inspection Instructions (Form 379).
Print / download a PDF copy of the instructions.
|Gantry Model Number:||A0T12-A15AC|
|I-Beam:||A 8″ x 6.40#/’ x 15′|
|I-Beam Length (Overall Span):||180 Inches|
|Maximum Cantilever Distance (A):||45 Inches|
|Gantry Rated Capacity:||1000 lbs.|
|Maximum Cantilevered Load (B):||600 lbs.|
|Gantry Weight:||310 lbs.|
|I-Beam Weight:||98 lbs.|
Proper Cantilever Procedures
Required counterweight should not be supported by gantry caster frame.
Load and trolley should be able to freely traverse the I-beam through the main legs and brace legs of the gantry.
|Required Counterweight at (C)|
Print / download a PDF copy of these cantilever instructions.
Warranty and Disclaimer
Wallace product warranty and errors and omissions disclaimers can be found below.
They are also in the About section of this website and on the main 1/2 – 3 ton aluminum Tri-Adjustable gantry crane page.
Gantry end frames shall be of aluminum alloy round-tube construction manufactured to Wallace Cranes standards including, but not limited to, the following:
- Gantry shall be adjustable in height and have main leg center castings for brace leg attachment to main support legs.
- Gantry shall be adjustable in span so that operators may adjust the crane to an inboard braced, outboard braced, or a combination of the two or approved cantilevered configuration.
- Gantry shall be adjustable in caster frame spread and have aluminum castings for attachment of casters.
- The aluminum alloy I-beam shall be American Standard and have a design deflection of no greater than l/450th of the span. The I-beam shall also be free-swinging and self-aligning to lift off-center loads as approved.
- The telescoping legs shall be adjustable in 6” increments and also be equipped with malleable iron safety stops for everyday use as well as when adjusting height.
- Spread adjustment on the caster frame shall be in 6” increments. Over spreading of the caster frame adjustment shall be prevented by means of an internal steel safety cable.
- The main leg center casting shall have spring-loaded pearlitic grade load-adjusting pins for adjusting/maintaining height adjustment of crane as well as attachment of brace legs.
- Gantry shall be equipped with four (or eight, depending on the model), 360 degree rotating, non-marking phenolic resin casters with 4-position swivel locks, at 90 degrees, to provide easy steering of crane by locking “lead” casters only, or to allow positioning of crane more firmly than a brake by locking all four (or eight depending on the model), casters 90 degrees to each other. Casters shall be 6” or 8” diameter as determined by capacity, height, and span of crane.
- The model number to be provided shall be tested in accordance with Wallace Cranes specifications (A specific unit shipped is not tested; unless a Certificate of Test is ordered [additional charge applies]).
- Gantry is manufactured in accordance with our interpretation of ANSI B30.17 and U.S. OSHA, (Section 1910.179, revised January 1976), regulations at the time of manufacture.
Print / download a PDF version of the specification.
We Are Here To Help
Wallace also offers aluminum Thrifty cranes, an economical, lighter-weight alternative to our Tri-Adjustables. Thrifties have a greater clear span than the Tri-Adjustable, come in fixed and adjustable heights, and weigh as little as 135 pounds.