Thrifty Aluminum Gantry Crane, Fixed-Height, 1-Ton Capacity, 15' Span, 9'10

Model FA29-15AC

Thrifty Aluminum Fixed-Height Gantry Crane
1-Ton Capacity, 15′ Span, 9’10″ Height

Aluminum Construction
✓ 1-Ton (2,000 pound) capacity (A)
✓ 15′ Span
✓ 13′ 10″ Clear Span (D)
✓ 9’10” Height (C)
✓ 4′ 6″ Tread (E)
✓ 6″ Caster Diameter (F)
✓ 10″ I-Beam Depth (G)
✓ 234 Pounds Ship Weight

Designed and manufactured in the United States
Completely portable
Easy to assemble, disassemble, transport, and store
Lightweight yet strong
Designed to roll under load

Most orders ship in 3 to 5 days.


Product Details

Model FA29-15AC

Key Features

Lightweight, Adjustable, and Portable

The lightweight and corrosion-resistant Thrifty Aluminum 1-ton fixed-height gantry crane is one of our most popular product lines and offers the greatest clear span (D) of any Wallace crane. The aluminum design makes these cranes an ideal combination of high-lifting ability and reduced weight. They are easy to assemble and disassemble for convenient portability.

  • The Thrifty is built using our patented pinned-joint design resulting in a longer-lasting, better-fitting, more flexible crane that is quick and easy to assemble and disassemble.
  • Strong rectangular posts and frames.
  • Gussets for added strength eliminate the need for brace legs which allows for a greater clear span
  • The exclusive Wallace I-beam support system aligns off-center loads to avoid distortion of the crane and trolley.
  • Casters are equipped with a 4-position swivel lock. When locked 90 degrees with each other, they position the crane more firmly than a brake.
  • Completely portable – many aluminum models can be hand-carried.
  • Designed to roll under load.

Model FA29-15AC

Dimensional Drawing

Thrifty Aluminum Gantry Crane, Fixed-Height, 1-Ton Capacity, 15' Span, 9'10

Print / download FA29-15AC dimensional drawing (PDF).

View I-Beam Flange Width Chart for Wallace Gantries.

Model FA29-15AC

Parts List

ITEM NO. PART DESCRIPTION
1 I-BEAM
2 END FRAME
3 CASTER
4 CAP SCREW – CASTER
5 LOCK WASHER – CASTER
6 HEX NUT – CASTER
7 CAP SCREW
8 BEVEL WASHER
9 LOCK WASHER
10 HEX NUT

Note: There are alternate v-groove casters available for use on angle iron track.

Print / download a copy of the Thrifty fixed-height aluminum gantry parts list and parts location diagram (PDF).

Model FA29-15AC

Parts Location Diagram

Thrifty Aluminum Fixed-Height Gantry Crane Parts Location Diagram | Wallace Cranes

Wallace Thrifty Aluminum Fixed-Height Gantry Crane Parts Location Diagram


Print / download a copy of the Thrifty Aluminum Fixed-Height gantry crane parts list and parts location diagram (PDF).

Model FA29-15AC

Optional Accessories

Sample Trolleys and Hoists Available for Fixed-Hight Thrifty Gantry Cranes | www.wallacecranes.com

Sample Trolleys and Hoists Available for Wallace Thrifty Gantry Cranes


Available accessories include manual and electric trolleys and hoists as well as festooning kits to keep hoist, trolley, and power drive system cords up and out of the way. Cable ratchet kits to speed height adjustments, and adjust-a-span kits for quick span adjustments that allow the frame and post assembly to slide along the I-beam.

Options for track mounting with V-groove casters and motorizing cranes are also available.

Model FA29-15AC

Assembly and Disassembly Instructions

Cautions

  1. Make sure that all CAUTION labels and safety tags are in place and legible.
  2. Inspect that rated capacity is plainly marked on each side of I-Beam.
  3. Each hoisting unit shall have its rated load clearly marked and legible from ground or floor.

Before You Begin

  1. Clear an open area at least as large as 2 X the frame length and wider than the beam.
  2. Get a crane or lifting device capable of lifting the entire weight of the completed crane.
  3. Assemble a work crew of no less than three. One will operate the lifting crane and the others perform the assembly. You may need
    more to lift the higher capacity legs.

Print / download a PDF of the combined parts list and detailed, step-by-step Thrifty Assembly Instructions (Form 218).

Model FA29-15AC

Inspection Checklist (Form 504)

Instructions include:

  • What to check for.
  • How often to check.
  • Frequent Inspection Checklist.
  • Periodic Inspection Checklist.

View detailed Gantry Crane Inspection Checklist (Form 504).

Print / download a PDF copy of the checklist.

If you have questions or need assistance, please contact us.

Disclaimer

Please note this checklist was derived from company proprietary materials and (3) source documents including ANSI B30.17CMAA Specification #74 Revised 1987, and OSHA 1910.179. As excerpts, the short form Wallace documents are intended to serve as general guidelines and are not to be considered the sole source when performing routine maintenance and inspection tasks.

Model FA29-15AC

Operating, Adjustment, and Inspection

Instructions (Form 1004)

Instructions include:

  • Inspecting Crane Before Moving and/or Each Day’s Use
  • Positioning of Crane to Handle Loads
  • Positioning of Casters
  • General Safety Instructions for Crane Adjustments and Use
  • Methods of Supporting Crane for Assembly

View detailed Thrifty Operating, Adjustment, and Inspection Instructions (Form 1004).

Print / download a PDF copy of the instructions.

Model FA29-15AC

Warranty and Disclaimer

Wallace product warranty and errors and omissions disclaimers can be found below.

They are also in the About section of this website and on the main Thrifty Aluminum Fixed-Height 1/2 and 1-Ton Gantry Crane page.

Model FA29-15AC

Engineering Specification

Gantry end frames shall be of aluminum rectangular tube construction manufactured to Wallace Cranes standards including, but not limited to, the following:

  • Gantry shall be adjustable in height.
  • Gantry shall have fixed tread.
  • The aluminum alloy I-beam shall be American Standard and have a design deflection of no greater than l/450th of the span.
  • The telescoping posts shall be adjustable in 6” increments when adjusting height. The posts shall have internal reinforcement as well as gussets welded to top plates.
  • The main frames shall have a spring-loaded load-adjusting pin for adjusting/maintaining the height of the crane. Frames will be manufactured with custom-made channel for better fit with bolt and plate upon assembly.
  • Gantry shall be equipped with four, 360-degree rotating, non-marking phenolic resin casters with 4-position swivel locks, at 90 degrees, to provide easy steering of crane by locking “lead” casters only, or to allow positioning of the crane more firmly than a brake by locking all four casters 90 degrees to each other. Casters shall be 6” in diameter.
  • The model number to be provided shall be tested in accordance with Wallace Cranes specifications (A specific unit shipped is not tested; unless a Certificate of Test is ordered [additional charge applies]).
  • Optional cable ratchet hoist kits for height adjustment are available for an additional charge. Please specify when ordering.
  • Optional span adjustment kits on cranes up to 15’ I-beam spans are available for an additional charge. Must specify when ordering.
  • Gantry is manufactured in accordance with our interpretation of ANSI B30.17 and U.S. OSHA, (Section 1910.179, revised January 1976), regulations at the time of manufacture.

Print / download a PDF version of the specification.

Want Help?

We have experts on hand to answer all your questions (1-800-553-5438).

Related Products

Wallace offers other Thrifty steel adjustable-height models as well as steel, adjustable-height Tri-Adjustables in 1 to 10-ton capacities, and Hybrid (steel frame aluminum I-beam) adjustable-height models in 1 – 5 capacities. See all our gantry options below.

Tri-Adjustable Round Tube Gantry Crane Dimensional Sketch | Wallace Cranes

Tri-Adjustable Sketch