Model FHS411-S10AC
Hippolift Steel 2-Ton Gantry Crane
10′ Span 10′ 10″ Height
✓ Steel Construction
✓ 2-Ton (4,000 pound) capacity (A)
✓ 10′ Adjustable Span (B)
✓ 6′ 4″ Clear Span (D)
✓ 10′ 10″ Overall Fixed Height (C)
✓ 6′ Fixed Caster Frame Spread (E)
✓ 10″ Leg Clearance (F)
✓ 8″ Caster Diameter (G)
✓ 8″ I-Beam Depth (H)
✓ 806 Ship Weight
Designed and manufactured in the United States
Completely portable
Easy to assemble and disassemble
Strong, stable and durable
Designed to roll under load
Most orders ship in 3 to 5 days.
Product Details
Model FHS411-S10AC
Key Features
Strong, Stable, Durable, and Portable
The Hippolift steel 2-ton fixed-height, adjustable-span portable gantry crane is an ideal combination of strength, stability, durability, and portability. It can be used for both indoor and outdoor, commercial and industrial applications due to its design allowing for mobility and flexibility across different environments. The Hippolift is ideal when you need heavy lifting capacity and quick, easy assembly and disassembly. It is a portable, heavy-duty alternative to a more expensive overhead crane that would require permanent installation.
Made with high-quality American Standard heavy-gauge steel square tubing, our 2-ton Hippolifts are designed to roll under load. They are extremely stable with a self-aligning I-beam and casters with 4-position swivel locks. They have an adjustable span (B), fixed height (C) and tread (E).
- The Hippolift is built using our patented pinned-joint design, which results in a longer-lasting, better-fitting, more flexible crane that is quick and easy to assemble and disassemble.
- Strong square-tube steel posts and frames.
- An adjustable span allows for inboard or outboard bracing and a cantilever configuration overhang of up to 25% of the I-beam length.
- The exclusive Wallace I-beam support system aligns off-center loads to avoid distortion of the crane and trolley.
- Casters are equipped with a 4-position swivel lock. When locked 90 degrees with each other, they position the crane more firmly than a brake.
- Completely portable. Hippolifts can be rolled around to serve more than one workstation or workplace. Simply lock “lead” casters and unlock trailing casters to easily move and steer the crane.
Model FHS411-S10AC
Parts List
| ITEM NO. | PART DESCRIPTION | PART NUMBER | QUAN. |
|---|---|---|---|
| 1 | PIN – SUPPORT 1 DIA X 5 3/4 LG. | 5018-0002 | 4 |
| 2 | BRACKET – MAIN LEG | 6008-1 | 4 |
| 3 | HEX. NUT 3/8-24NF | 54-0100 | 8 |
| 4 | SOC. SET SCREW 3/8-24NF X 1 3/4 LG. | 63-0110 | 8 |
| 5 | PIN- SUPPORT 11/16 DIA. X 5 11/16 LG. | 5017-0006 | 4 |
| 6 | SPACER BAR 16″ LG. | 3604-0006 | 2 |
| 7 | BRACKET – BRACE LEG | 6008-2 | 4 |
| 8 | I-BEAM STL 8″ X 10′ LG. | 761-0100 | 1 |
| 9 | KEY RING 2 1/4 DIA. | 82-0030 | 18 |
| 10 | CAUTION TAG No. 399 | 1969-RING | 16 |
| 11 | LOCK WASHER INT. TOOTH 3/4 | 58-0040 | 4 |
| 12 | HEX. NUT 3/4-10NC | 54-0040 | 4 |
| 13 | TROLLEY STOP ANGLE | 3464-0000 | 4 |
| 14 | HEX. HD. BOLT 3/4-10NC X 2 1/2 LG. | 51-0480 | 4 |
| 15 | BRACE LEG | 3625-0100 | 4 |
| 16 | MAIN LEG | 3627-0100 | 4 |
| 17 | PIN – SUPPORT 11/16 DIA. X 4 9/16 LG. | 5017-0004 | 4 |
| 20 | HEX HD. BOLT 1/2-13NC X 4 LG. | 51-0460 | 4 |
| 21 | LOCK WASHER INT. TOOTH 1/2 | 58-0020 | 4 |
| 22 | HEX. NUT 1/2-13NC | 54-0050 | 4 |
| 23 | PIN-LOWER LEG 3/4 DIA. X 5 1/8 LG. | 5023-0000 | 4 |
| 24 | CASTER PLATE | 5047-0000 | 4 |
| 25 | HEX. HD. BOLT 1/2-13NC X 1 3/4 LG. | 51-0300 | 16 |
| 26 | LOCK WASHER INT. TOOTH 1/2 | 58-0020 | 16 |
| 27 | HEX. NUT 1/2-13NC | 54-0050 | 16 |
| 28 | CASTER WHEEL 8″ DIA. | 47-81NB | 4 |
| 29 | CASTER FRAME TUBE | 3628-0100 | 2 |
| 30 | COTTER PIN 1/4 X 2 LG. | 60-0040 | 4 |
Print / download a copy of the Model FHS411-S10AC parts list (PDF). The file also contains a copy of the parts location diagrams.
Model FHS411-S10AC
Parts Location Diagrams
Square-Tube Hippolift 1-3 Ton I-Beam Assembly Parts Location Diagram. Click to enlarge.
Square-Tube Hippolift 1-3 Ton Caster Frame Assembly Parts Location Diagram. Click to enlarge.
Print / download a copy of the Model FHS411-S10AC parts location diagrams (PDF). The file also contains this model’s parts list.
Model FHS411-S10AC
Optional Accessories
Sample Trolleys and Hoists Available for Wallace Hippolift Gantry Cranes
Available accessories include:
- manual and electric trolleys,
- hook-mounted, wheeled, and electric hoists, and
- festooning kits to keep hoist, trolley, and power drive system cords up and out of the way.
Alternate V-grooved casters are also available for use on an angle iron track.
Model FHS411-S10AC
Assembly and Disassembly Instructions
(Form 449)
Cautions
- Read and understand instructions before using this gantry.
- Inspect gantry thoroughly before using (see Form 379F) for damaged or missing parts.
- Do not lift more than rated capacity.
- Center hoist over the load.
- Do not allow load to swing or to roll against any supporting members.
- When moving gantry under load, push on the gantry, not the load. Be certain that rolling surface is hard, level, clean and smooth.
- Do not move gantry over 50 feet per minute (1/2 mph).
- Not to be used for lifting or supporting humans.
Before You Begin
- Select a clear area to assemble the crane. The work envelope should extend five feet beyond twice the leg length (when flat) and the length of the I-beam.
- This clear area should be serviced by two overhead hoists or an alternate as shown in Form 379F. The cranes will raise the I-beam and leg assemblies when required.
- Select tools for fastening the nuts and bolts. You will also need C-clamps to hold the trolley in place while the crane is assembled.
- Place parts on a flat surface, preferably on cardboard, to keep small parts clean and organized.
Please print / download a PDF of the Hippolift Steel Fixed-Height Portable Crane Assembly Instructions or Form 449 (154 KB) for detailed, step-by-step instructions.
Model FHS411-S10AC
Inspection Checklist (Form 504)
Instructions include:
- What to check for.
- How often to check.
- Frequent Inspection Checklist.
- Periodic Inspection Checklist.
View detailed Gantry Crane Inspection Checklist (Form 504).
Print / download a PDF copy of the checklist.
If you have questions or need assistance, please contact us.
Disclaimer
Please note this checklist was derived from company proprietary materials and (3) source documents including ANSI B30.17, CMAA Specification #74 Revised 1987, and OSHA 1910.179. As excerpts, the short form Wallace documents are intended to serve as general guidelines and are not to be considered the sole source when performing routine maintenance and inspection tasks.
Model FHS411-S10AC
Operating, Adjustment, and Inspection Instructions (Form 379F)
Instructions include:
- Inspecting Crane Before Moving and/or Each Day’s Use
- Positioning of Crane to Handle Loads
- Positioning of Casters
- Visual Checkpoints
- General Safety Instructions for Crane Adjustments
- Methods for Supporting Crane for Assembly
- Inspection Checklist (Form 504)
View detailed Wallace Fixed Height Gantry Cranes Operating, Adjustment, and Inspection Instructions (Form 379F).
Print / download a PDF copy of the instructions (271 KB).
Model FHS411-S10AC
Cantilever Instructions
Cantilever Chart
| Gantry Model Number: | FHS411-S10AC |
| I-Beam: | S8″ x 18.4#/’ x 10′ |
| I-Beam Length (Overall Span): | 120 Inches |
| Maximum Cantilever Distance (A): | 30 Inches |
| Gantry Rated Capacity: | 4000 lbs. |
| Maximum Cantilevered Load (B): | 2400 lbs. |
| Gantry Weight: | 806 lbs. |
| I-Beam Weight: | 184 lbs. |
Proper Cantilever Procedures
Required counterweight should not be supported by gantry caster frame.
Load and trolley should be able to freely traverse the I-beam through the main legs and brace legs of the gantry.
| Required Counterweight at (C) | ||||||||
| A | B | B | B | B | B | B | B | B |
|---|---|---|---|---|---|---|---|---|
| IN FEET |
300 lbs. |
600 lbs. |
900 lbs. |
1200 lbs. |
1500 lbs. |
1800 lbs. |
2100 lbs. |
2400 lbs. |
| 1 | 0 | 0 | 0 | 0 | 0 | 7 | 73 | 140 |
| 2 | 0 | 0 | 70 | 220 | 370 | 520 | 669 | 819 |
| 2.5 | 0 | 27 | 227 | 427 | 627 | 827 | 1027 | 1227 |
Print / download a PDF copy of these FHS411-S10AC cantilever instructions.
Model FHS411-S10AC
Warranty and Disclaimer
Wallace product warranty and errors and omissions disclaimers can be found below.
They are also in the About section of this website and on the main Hippolift Steel Fixed-Height Portable Gantry Crane page.
Model FHS411-S10AC
Engineering Specification
Gantry end frames shall be of steel square tube construction manufactured to Wallace Cranes standards including, but not limited to, the following:
- Gantry shall be fixed in height.
- Gantry shall be adjustable in span so that operators may adjust the crane to an inboard braced, outboard braced, or a combination of the two or approved cantilevered configuration.
- Gantry shall have a fixed caster frame spread; and welded caster frame plates for attachment of casters.
- I-beam shall be American Standard with a design deflection of no greater than 1/800th of the span in accordance with Wallace design criteria. I-beam shall be free-swinging and self-aligning to allow lifting off-center loads.
- Gantry shall be equipped with four, 360 degree rotating, non-marking phenolic resin casters with 4-position swivel locks, at 90 degrees, to provide easy steering of the crane by locking “lead” casters only, or to allow positioning of the crane more firmly than a brake by locking all four casters 90 degrees to each other. Casters shall be 6” or 8” diameter as determined by capacity, height, and span of the crane.
- The I-beam and I-beam brackets shall be painted with red gloss industrial-quality paint.
- The frames, including brace legs, caster frames, and main legs, shall be dip-painted with red gloss industrial-quality paint to protect both inner and outer tubing walls.
- The model number to be provided shall be tested in accordance with Wallace specifications (A specific unit shipped is not tested; unless a Certificate of Test is ordered [additional charge applies]).
- Gantry bolts and hardware shall be plated to prevent corrosion.
- Gantry is manufactured in accordance with our interpretation of ANSI B30.17 and U.S. OSHA, (Section 1910.179, revised January 1976), regulations at the time of manufacture.
Print / download a PDF version of the specification.
Related Products
Wallace offers additional steel, fixed-height gantry cranes in our Thrifty models. Thrifties have gussets instead of brace legs, allowing for a greater clear span and lower ship weight. They are just as portable as our Hippolifts and come in 1-7.5 ton capacities.
Thrifty Sketch