Form 434	PARTS LIST
9/2/2015	www.wallacecranes.com

Steel and Aluminum 5-Ton Adjustable Height Gantry Crane
14′ 8″ Overall Height, 10-Foot 2-Inch Clear Span

MODEL NUMBER 5T15-A15AC

ITEM NO.	PART DESCRIPTION	PART NUMBER	QUAN.
1	SUPPORT PIN 1 DIA. X 6 3/16 LG.	5018-0003	4
2	MAIN LEG BRACKET	6012-1	4
3	HEX. NUT 3/8-24NF	54-0100	8
4	SOC. SET SCREW 3/8-24NF X 1 3/4 LG.	63-0110	8
5	PIN-SUPPORT 11/16 DIA. X 5 11/16 LG.	5017-0006	4
6	SPACER BAR 19 1/2 LG.	5307-1950	2
7	BRACE LEG BRACKET	6012-2	4
8	I-BEAM STL. 12″ X 15′ REINF. 8″ X 5′	1680-0151	1
9	CAUTION TAG NO. 399	1969-RING	12
10	KEY RING 2 1/4 DIA.	82-0030	14
11	LOCK WASHER INT. TOOTH 3/4	58-0040	4
12	HEX. NUT 3/4-10NC	54-0040	4
13	TROLLEY STOP ANGLE	5132-0000	4
14	HEX. HD. BOLT 3/4-10NC X 2 1/2 LG.	51-0480	4
15	BRACE LEG	5014-0003	4
16	MAIN LEG ASSEMBLY	5008-0101	4
17	UPPER MAIN LEG	5034-0003	4
18	ROLL PIN 5/32 X 3/4 LG.	61-0300	4
19	LOAD PIN CASTING	3016-0000	4
20	EXTENSION SPRING	1017-0000	8
21	LOWER MAIN LEG	5035-0003	4
22	SAFETY STOP ASSEMBLY	3112-0001	4
23	CASTER FRAME ASSEMBLY	5007-0100	2
24	SAFETY CABLE ASS’Y 100″ LG.	5028-0003	2
25	OUTER CASTER FRAME TUBE	5016-0003	2
26	CASTER FRAME ADJUSTMENT PIN	5139-0000	2
27	INNER CASTER FRAME TUBE	5051-0003	2
28	HEX. HD. BOLT 1/2-13NC X 3 1/2 LG.	51-0500	2
29	CASTER PLATE	5030-0000	4
30	LOWER MAIN LEG PIN 3/4 DIA. X 5 1/8 LG.	5023-0000	4
31	HEX H.D. BOLT 1/2-13NC X 4 LG.	51-0460	6
32	HEX H.D. BOLT 1/2-13NC X 1 3/4 LG.	51-0300	32
33	CASTER WHEEL 8″ DIA.	47-81NB	8
34	LOCK WASHER INT. TOOTH 1/2	58-0020	40
35	HEX. NUT 1/2-13NC	54-0050	40

71 N. Bacton Hill Rd	wallace@wallacecranes.com	800-553-5438
Malvern PA 19355-1005		610-647-1400

	Form 123
	8/14/2015

Gantry Model Number:	5T15-A15AC
I-Beam:	A12″ X 11#/’ X 15′ REINF 8″ X 6.4′ X 5′
I-Beam Length (Overall Span):	180 Inches
Maximum Cantilever Distance (A):	45 Inches
Gantry Rated Capacity:	10,000 lbs.
Maximum Cantilevered Load (B):	6000 lbs.
Gantry Weight:	1350 lbs.
I-Beam Weight:	198 lbs.

Required counterweight should not be supported by gantry caster frame.

Load and trolley should be able to freely traverse the I-beam through the main legs and brace legs of the gantry.