Wheeled (Push) and Geared Crane Trolleys

Wheeled (Push) and Geared Crane Trolleys2019-01-25T19:48:31+00:00

Wheeled (Push) and Geared Crane Trolleys

Illustrative i-beam, hoist and trolley mechanism | Wallace Cranes
A crane hoist holds, raises and lowers loads using a wire rope or chain. The hoist is attached to the crane’s I-beam with a hoist/trolley combination or at least a beam clamp.

A crane trolley (shown below) is the wheeled (push) or geared mechanism that allows the hoist (and its load) to move horizontally along the I-beam.

Wallace wheeled (push) and geared trolleys for gantry cranes are itemized below.

Push Trolley
CapacityModelHeadroomI-Beam Depth Range (in).Ship Wt. (lbs.)
1/2 Ton70-03154.09″3″ – 15″17
1 Ton70-16102″6″ – 10″20
70-16152″6″ – 15″21
2 Ton70-28152.13″8″ – 15″30
70-28182.13″8″ – 18″30
3 Ton70-38152.25″8″ – 15″ 51
70-38202.25″8″ – 18″52
5 TonW70-51184.25″10″ –  18″83
W70-51244.25″10″- 24″85
8 TonC70-8T10.63″10″ – 24″ 350
10 TonC70-10T11.13″10″ – 24″ 360
Sample Push Trolley | Wallace Cranes

 

Geared Trolley
CapacityModelHeadroomI-Beam Depth Range (in).Ship Wt. (lbs.)
1/2 TonCGT-04124.88″4″ – 12″38
1 TonCGT-16185.38″6″ – 18″62
2 TonCGT-26206.75″6″ – 18″90
3 TonCGT-36206.88″6″ – 18″93
5 TonCGT-58248.63″8″ – 24″188
8 TonCGT-8T10.63″10″ – 24″397
10 TonCGT-10T11.13″10″ – 24″410
Sample Geared Trolley | Wallace Cranes

 

Wallace “S” I-Beam Chart (9.5° Flange) for Gantry Cranes
Aluminum
Beam HeightFlange WidthLbs./ft.
6″3.33″4.3
8″4″6.4
10″4.66″8.8
12″5″11.0
Steel
Beam HeightFlange WidthLbs./ft.
6″3.33″12.5
8″4″18.4
10″4.66″25.4
12″5″31.8
15″5.5″42.9
18″6″54.7
24″7″80.0

NOTE: Contact our Sales Department for current information on the 15 Ton Capacity cranes with 35 ft. I-Beams.