Wall Bracket Tie Rod Jib Cranes

Wallace offers tie rod jib cranes designed for use in bays, along walls, in work cells and as supplements to gantry cranes and overhead crane systems.  The tie rod style is similar to the wall bracket cantilever style but is more economical if headroom is not an issue.   Units have 180 degree rotation as standard and are available in a variety of capacities and spans as shown in the chart below.

FITTINGS – Heavy duty with effortless rotation, cast iron fittings with roller bearings and zerk fittings for easy field lubrication

BENEFITS vs. WALL BRACKET CANTILEVER

  • Most economical solution
  • Less beam deflection
  • Smaller beam size
  • Easier to rotate in larger applications
  • Hook travel closer to mounting column
  • Easier to adjust tip of boom

Dimensional Sketch – Click to enlarge

Crane Sizes and Model Numbers

A B C D
Capacity Span Model Number Support Bracket Center Boom Depth Support to Pivot Point Net Wt.
1/2 Ton 8′ HSR0-J1-08 2’9″ 6″ 3″ 210
10′ HSR0-J1-10 3’0″ 6″ 3″ 240
12′ HSR0-J1-12 3’9″ 6″ 3″ 270
14′ HSR0-J1-14 4’6″ 6″ 3″ 305
1 Ton 8′ HSR1-J1-08 2’9″ 6″ 3″ 210
10′ HSR1-J1-10 3’3″ 6″ 3″ 240
12′ HSR1-J1-12 4’0″ 6″ 3″ 270
14′ HSR1-J1-14 4’9″ 8″ 3″ 405
2 Ton 8′ HSR2-J2-08 2’9″ 8″ 4″ 378
10′ HSR2-J2-10 3’3″ 8″ 4″ 431
12′ HSR2-J2-12 4’0″ 10″ 4″ 569
14′ HSR2-J2-14 4’9″ 10″ 4″ 636
3 Ton 8′ HSR3-J3-08 2’9″ 12″ 4.5″ 700
10′ HSR3-J3-10 3’3″ 12″ 4.5″ 730
12′ HSR3-J3-12 4’0″ 12″ 4.5″ 760
14′ HSR3-J3-14 4’9″ 12″ 4.5″ 790

Note: Wide flange beams are normally used on Jib Cranes however, American Standard beams may be substituted due to current steel price volatility and availability.  These beams may also require special trolleys (consult factory if necessary).  Spans up to 20’ available.

Wall Bracket Cantilever Jib Cranes

Wallace offers cantilever jib cranes designed for use in bays, along walls, in work cells and as supplements to gantry cranes and overhead crane systems.  Units have 180+ degree rotation as standard and are available in a variety of capacities and spans as shown in the chart below.

FITTINGS – Heavy duty with effortless rotation, cast iron fittings with roller bearings and zerk fittings for easy field lubrication

BENEFITS vs. WALL BRACKET TIE ROD

  • Less headroom needed for mounting
  • More headroom for hoist lifting

Dimensional Sketch – Click to Enlarge

Crane Sizes and Model Numbers

A B C D
Capacity Span Model Number Support Bracket Center Boom Depth Support to Pivot Point Net Wt.
1/4 Ton 8′ HSCX-J1-08 4′ 8″ 3″ 245
10′ HSCX-J1-10 4′ 8″ 3″ 298
12′ HSCX-J1-12 4′ 8″ 3″ 330
14′ HSCX-J1-14 4′ 8″ 3″ 460
1/2 Ton 8′ HSC0-J1-08 4′ 8″ 3″ 250
10′ HSC0-J1-10 4′ 8″ 3″ 298
12′ HSC0-J1-12 4′ 8″ 3″ 330
14′ HSC0-J1-14 4′ 10″ 3″ 640
1 Ton 8′ HSC1-J1-08 4′ 8″ 3″ 250
10′ HSC1-J1-10 4′ 10″ 3″ 460
12′ HSC1-J1-12 4′ 10″ 3″ 490
14′ HSC1-J2-14 5′ 12″ 4″ 775
2 Ton 8′ HSC2-J2-08 5′ 12″ 4″ 525
10′ HSC2-J2-10 5′ 12″ 4″ 665
12′ HSC2-J2-12 5′ 12″ 4″ 740
14′ HSC2-J2-14 6′ 16″ 4.5″ 1200
3 Ton 8′ HSC3-J3-08 6′ 16″ 4.5″ 790
10′ HSC3-J3-10 6′ 16″ 4.5″ 840
12′ HSC3-J3-12 6′ 16″ 4.5″ 960
14′ HSC3-J3-14 6′ 18″ 4.5″ 1470

Note: Wide flange beams are normally used on Jib Cranes however, American Standard beams may be substituted due to current steel price volatility and availability. These beams may also require special trolleys (consult factory if necessary). Spans up to 20’ available.

Wall Bracket Jib Crane Kits

Fitting kits available for “Do-It-Yourself” crane fabrication.

 

Click above to download a dimensional chart

Full Cantilever Jib Crane Fitting Kits
Fitting Type Weight Model #
 J1 45 WFCJ1
 J2  110  WFCJ2
 J3  205  WFCJ3
Tie Rod Jib Crane Fitting Kits
Fitting Type Weight Model #
J1 57 WFBJ1
J2 140 WFBJ2
J3 350 WFBJ3

Make your own Wall Bracket Jib Crane using the same quality hinge fittings that are high grade ductile iron castings, machined and equipped with roller bearings for ease of rotation, grease fittings, and steel axles with cotter pins.  Do your own assembly, and buy your I-beam and tie rods locally. Handle loads of 1 thru 5 tons. Set consists of upper and lower hinges and boom end tie rod connector.  Specify capacity and span.  Complete instructions with kit.