| CAD
crane geometry lets you see if a crane will
fit your work envelope. The model at right
(with a 6 ft. scaling figure) is 15 ft.
span, 15 ft. high with a 10 ft. caster frame
spread. |
 |
New
8/25/04
- Models
updated to AutoCAD R2004 and Bentley MicroStation
V8 2004.
- Added
Tri-Adjustable Aluminum cranes with spans
up to 20 ft. and capacities to 3 tons.
Plant
equipment does not miraculously appear on the
factory floor, fully assembled, and ready to
go. An integral part of the planning process
is to determine how and when the tools of production,
from machine tools to conveyors, to paint enclosures
and inspection stations, are set-up and built.
The CAD models shown on this page are intended
for use in plant simulations or factory floor
layout.
Solid
CAD models, offered in several formats, provide
a representation of the footprint of some of
the product lines offered by Wallace.
Each crane is approximately 500 bytes, allowing
quick rendering and very low overhead.The 20
plus models included in this file are only about
5% of the total product line and were carefully
selected to indicate the range of sizes available
for each crane type. Custom models for cranes
not shown are also available.
|
