| Home | About Us | Products | Site Map | Contact |
How Do You Move the Motor
That Moves Your World?
Wallace Portable cranes like the Steel Tri-Adjustable shown above, easily roll through your plant. Our mobile cranes allow a single piece of lift equipment to take the motor from the loading dock to where it’s needed. Because nothing else is easy, before you replace the motor, you have to drop the coupling, lift the gear box, and lift out the old motor. For all these steps you can rely on a Wallace crane to provide the capacity and precision lifting. Tri-Adjustable cranes have the height to lift as needed and the ability to fit in tight spaces.
Wallace makes hundreds of cranes with heights from under 6 ft. to over 24 ft. Our capacities run from 500 to 30,000 lbs. What these numbers mean is that just about anything will fit under one of our proven Wallace Cranes. And because it fits, that “anything” can be repaired, replaced, refurbished, moved, removed, or dealt with. Choose reliability, choose Wallace.
This is another
installment of our series of application stories that highlight serious
lifting options. Please note that while no lifting slings are shown in
the image, for any real lifting you should be sure the crane, hoist,
and slings are sized for the expected load. To maintain the proprietary
nature of our technology, not all fasteners are shown. The intent is to
show the general design and typical applications.
Click
here for
specifications for this type of crane, a Tri-Adjustable Steel.
View the Tri-Adjustable Wallace Crane as a dynamic 3D PDF.
See an overview of the entire Wallace Crane line.
Adobe
Acrobat and PDF are registered trademarks of Adobe Systems, Inc.
Posted
7/15/09
|