Media Library

Material handling equipment application using Wallace Model A2T10-A10AC 1 Ton Aluminum Tri-Adjustable Gantry Crane, Wallace Model 70-1610 1 Ton Push Trolley and Model 5-214-10 Harrington Manual Hoist.

Material handling equipment application using Wallace Model A2T10-A10AC 1 Ton Aluminum Tri-Adjustable Gantry Crane, Wallace Model 70-1610 1 Ton Push Trolley and Model 5-214-10 Harrington Manual Hoist.

tripod_2

Engine repair application using Wallace Model H3-2142 1 Ton Aluminum Adjustable Tripod and Model 5-214-10 Harrington Manual Hoist.

dualwh_3

Machine Shop Drill Press Repair using Wallace Model FHS1013-S15AC 5 Ton Steel Hippolift Fixed Height Gantry Crane, Wallace Model 70-5118 5 Ton Push Trolley, and Model 5-114-10 Harrington Manual Hoist.

aircon_4

Air Conditioning Repair Application using the cantilever feature on Wallace Model A4T12-A15AC 2 Ton Aluminum Tri-Adjustable Gantry Crane. Note the caster frame is adjusted to its maximum length and gantry crane height is set to 2nd lowest height. Also using Model 70-1610 Wallace Push Trolley, Wallace Festoon Kit (for power cord on hoist) and Model 5-1BPT-15TH 1 Ton CM Electric Hoist and chain container.

steelb_5

Shipping/Receiving Application using the Wallace 3 Ton Square Tube Tri-Adjustable Crane. This crane has been equipped with our Wallace Electric Power Drive system that is designed to run on inverted angle-iron track. The Hoist is a 3 Ton CM Lodestar Electric Hoist with a Manual Trolley.

setup1_6

Assembling Wallace Gantry Crane Application without using a forklift truck. Assembling Wallace Model 5T15-A15AC 5 Ton Steel Frame with Aluminum I-Beam Gantry Crane utilizing a Wallace Model H3-2142 1 Ton Aluminum Tripod, Model 5-214-15 1 Ton Harrington Hand Hoist, Beam Clamps and a Spreader Beam. Gantry Crane is raised to its lowest height and then the Wallace Model 4405 Jack Kit is installed by mounting a jack on each leg so height can be adjusted up or down. The Jack Kit can also be mounted on the Caster Frame to adjust Caster Frame Spread. The Gantry Crane is also equipped with a Harrington 5 Ton Push Trolley and Model 5-114-10 Harrington Manual Hoist.

 Assemblingsetup2_7

Wallace Gantry Crane Application without using a forklift truck. Assembling Wallace Model 5T15-A15AC 5 Ton Steel Frame with Aluminum I-Beam Gantry Crane utilizing a Wallace Model H3-2142 1 Ton Aluminum Tripod, Model 5-214-15 1 Ton Harrington Hand Hoist, Beam Clamps and a Spreader Beam. Gantry Crane is raised to its lowest height and then the Wallace Model 4405 Jack Kit is installed by mounting a jack on each leg so height can be adjusted up or down. The Jack Kit can also be mounted on the Caster Frame to adjust Caster Frame Spread. The Gantry Crane is also equipped with a Harrington 5 Ton Push Trolley and Model 5-114-10 Harrington Manual Hoist.

setup3_8

Assembling Wallace Gantry Crane Application without using a forklift truck. Assembling Wallace Model 5T15-A15AC 5 Ton Steel Frame with Aluminum I-Beam Gantry Crane utilizing a Wallace Model H3-2142 1 Ton Aluminum Tripod, Model 5-214-15 1 Ton Harrington Hand Hoist, Beam Clamps and a Spreader Beam. Gantry Crane is raised to its lowest height and then the Wallace Model 4405 Jack Kit is installed by mounting a jack on each leg so height can be adjusted up or down. The Jack Kit can also be mounted on the Caster Frame to adjust Caster Frame Spread. The Gantry Crane is also equipped with a Harrington 5 Ton Push Trolley and Model 5-114-10 Harrington Manual Hoist.

aisle_9

Inventory Stocking Application using Wallace Model S2T10-S15 1 Ton Tri-Adjustable Gantry Crane, Model 70-1610 1 Ton Push Trolley and Model 5-214-10 Harrington 1 Ton Manual Hoist. The Caster Frame is set at the Minimum Spread allowing the Gantry Crane to be manually moved down a narrow aisle.

Machine Shop Application using Wallace Model S6T12-S10AC 3 Ton Tri-Adjustable Gantry Crane, Model 70-3815 Push Trolley, Model 5-614-10 3 Ton Harrington Manual Hoist and Wallace Model 4400 Jack Kit. The Caster Frame is at maximum spread and the Jacks are mounted to Main Legs and used to lower the height to allow the Crane to pass under factory door.

forkli_11

Shipping/Receiving Application using Wallace Model 30-TC24 Liftruk Krane with Pivot Boom on forklift truck to load a shipment.