|
| Home | About Us | Products | Site Map | Contact | Mixing
Air and Water?
|
Wallace Cranes has a long history in waste water treatment. Facilities across the country rely on our cranes to move pumps, motors, filters, couplings, valves, pipes, test equipment, and even blowers (like above). In addition to heavyweights like the 5-ton Tri-Adjustable shown above, our easily transportable and weather resistant aluminum cranes like the Aluminum Thrifty and Aluminum Tri-Adjustable are often used for lifting pump and motor sets from below grade.
Wallace makes
hundreds of cranes with heights from under 6 ft. to over
24 ft. Our capacities run from 500 to 30,000 lbs. What these numbers mean
is that just about
anything will
fit under one of our
proven Wallace Cranes. And because it fits,
that “anything” can be repaired,
replaced, refurbished, moved, removed, or dealt
with. Choose reliability,
choose Wallace.
This is another
installment of our series of application stories that highlight serious
lifting options. Please note that while no lifting slings are shown in
the image, for any real lifting you should be sure the crane, hoist,
and slings are sized for the expected load. To maintain the proprietary
nature of our technology, not all fasteners are shown. The intent is to
show the general design and typical applications.
Click
here for
specifications for this type of crane, a Tri-Adjustable Steel.
View the Tri-Adjustable Wallace Crane as a dynamic 3D PDF.
See an overview of the entire Wallace Crane line.
Adobe Acrobat and PDF are registered trademarks of Adobe Systems, Inc.
Posted
1/12/10